<u id="oqj1j"><font id="oqj1j"></font></u>
<pre id="oqj1j"></pre>
      

        • <table id="oqj1j"></table>
          2. 

          
女人18毛片a级毛片免费视频,亚洲成人av免费一区,国产亚洲综合久色av,在线看片免费人成视频播,久草国产在线观看,久久高清超碰AV热热久久,亚洲色偷偷色噜噜狠狠99,无遮挡国产高潮视频免费观看 





          
    
          
        
          
            
          您好！歡迎訪問上海起發實驗試劑有限公司網站！
          
            
        
          
    
          
    
          
        
          
            
            
          
                全國服務咨詢熱線:
                
          15921799099
          
            
          
        
          
    
          

          
    

          


          





          







          
    
          
        
          當前位置：首頁 > 技術文章 > 上海起發enzyscree2022年價格表
          
    
          
    
    
          
    	
          
        	
            
          上海起發enzyscree2022年價格表
          
            
          更新時間：2022-05-05      點擊次數：1561
          
            
          
                
           
           
          上海起發enzyscree sandwich covers使用方法
           
          所謂的“夾層蓋"和夾具系統可用于：•6 個圓形和方形孔板（3-35 ml 培養物）•24 方形深孔板和超高深孔板（2.5 - 8 ml 培養物）•24 輪低孔板（0.75 - 1 ml 培養物）•96 方形深孔板和半深孔板（0.3 - 0.75 ml 培養物）•96 圓低孔板（0.1 - 0.2 ml 培養物）
           
          應用領域： - 高通量篩選新的酶活性或次級代謝物的形成   （異質培養物集合）- 培養 CHO 細胞和其他動物細胞系（參見CHO 細胞專用頁面）- 篩選和分發大腸桿菌或酵母中的克隆文庫（參見細菌頁面）- 高通量篩選高活性或高產突變體   （見細菌頁面）- 比較研究，例如臨床分離株- 生長培養基優化研究
           
           
          ?
          主要成分：夾層蓋將微量滴定板的所有孔轉化為適用于高濃度的獨立“微型反應器"頻率軌道振蕩，在高氧氣轉移率下，并且沒有井間變化。蓋夾確保深孔板及其夾層蓋緊緊夾在一起，從而防止井間污染。低溫復制器：一種精密的彈簧加載裝置，用于同時和可重復的采樣96 種冷凍甘油原液。使用 CRYO-REPLICATOR 培養物庫存可以保持多年，因為他們可以保持凍結狀態。冷凍復制壓機是一種引導系統，可確保在復制菌株組期間的準確性.
           
           
           
           
          高壓滅菌和三明治蓋的使用：1.包裹三明治蓋（在聚丙烯 MTP 頂部，或不帶 MTP 以防萬一γ 輻照的聚苯乙烯 MTP 將用于鋁箔中（替代方案：使用滅菌袋）。2.在 120 oC 下高壓滅菌 20-30 分鐘，然后最好進行干燥循環。3.取下鋁箔。4.如果使用的高壓滅菌器沒有干循環選項，請干燥夾層蓋（有或沒有MTP) 在烘箱中設置為 ~ 100-110 oC 1 小時，以干燥過濾層。5.將三明治蓋（帶或不帶 MTP）放在層流柜中。6.用一個適當的無菌液體生長培養基（有關建議體積，請參閱流體動力學和氧氣轉移率）。7.單獨接種 MTP 的孔，或使用菌擇器，或復制器（請參閱我們關于“復制器的使用"的網頁）。8.將三明治蓋放在 MTP 的頂部。9.將夾層蓋 + MTP 放入我們的一個夾子中系統（附在軌道振動平臺上），如在“夾具系統的使用"頁面上進行了描述。
          三明治蓋的清潔和維護- 使用后，可使用紙巾和水-乙醇混合物清潔海綿狀硅膠層。               - 除非絕對必要，否則不要拆卸三明治蓋。- 超細纖維過濾器（藍色）和 ePTFE 過濾器（綠色）至少可以使用 20-50 次：如果太臟，請更換。更換過濾器可以在包裝中獲得20。- 海綿狀硅膠層可以重復使用數百次，前提是夾層蓋的壓縮時間不超過約 10 天（在后一種情況下，硅膠層可能無法*恢復其原始形狀）。
           

          上海起發enzyscree2022年價格表
           
          貨號品名規格價格品牌
          CR1000Cryo replicatorea17800enzyscreen
          CR1024Cryo replicator with 24 pins of 3 mm diameterea15800enzyscreen
          CR1100Cryo replicator press ea25000enzyscreen
          CR1200Sandwich cover with no holes in the silicone layer (with closed cell, solid silicone, or butylrubber layer: please specify in order)ea1220enzyscreen
          CR1206Sandwich cover for extra high 6- deepwell MTPs  (with black solid silicone, hole size 7 mm)ea1880enzyscreen
          CR1206aSandwich cover for extra high 6- deepwell MTPs  (with black solid silicone: hole size: 4 mm, low evap.)ea1880enzyscreen
          CR1224Sandwich cover for all types of 24 deepwell MTPs  (with closed cell silicone, 2.5 mm holes)ea1660enzyscreen
          CR1224aSandwich cover for all types of 24 deepwell MTPs  (with closed cell silicone, 1.2 mm holes, low evap.)ea1660enzyscreen
          CR1224bSandwich cover for 24 deepwell MTPs CR1424a, b,c, and d  (with closed cell silicone, fixed with pins, 2.5 mm holes)ea1880enzyscreen
          CR1224cSandwich cover for 24 deepwell MTPs CR1424a, b,c, and d  (with closed cell silicone, fixed with pins, 1.2 mm holes, low evap.)ea1880enzyscreen
          CR1224dSandwich cover for all types of 24 deepwell MTPs  (with black solid silicone, 2.5 mm holes)ea1880enzyscreen
          CR1224eSandwich cover for all types of 24 deepwell MTPs  (with black solid silicone, 1.2 mm holes, low evap.)ea1880enzyscreen
          CR1224fSandwich cover for 24 deepwell MTPs CR1424a, b,c, and d  (with black solid silicone, fixed with pins, 2.5 mm holes)ea1880enzyscreen
          CR1224gSandwich cover for 24 deepwell MTPs CR1424a, b,c, and d  (with black solid silicone, fixed with pins, 1.2 mm holes, low evap.)ea1880enzyscreen
          CR1224hSandwich cover for high 24 well plates (wells of 25 ml each)  (with closed cell silicone, 2.5 mm holes)ea1880enzyscreen
          CR1224iSandwich cover for high 24 well plates (wells of 25 ml each)  (with closed cell silicone, 1.2 mm holes)ea1880enzyscreen
          CR1224tCO2 release Sandwich cover for all types of 24 well MTPs  (solid silicone, with 24 FEP tubes, 0.1 mm I.D. x 5mm )ea2500enzyscreen
          CR1296Sandwich cover for all types of 96 deepwell MTPs (with closed cell silicone, 1.5 mm holes)ea1660enzyscreen
          CR1296aSandwich cover for all types of 96 deepwell MTPs  (with black solid silicone, 0.8 mm holes, low evaporation)ea1880enzyscreen
          CR1296bSandwich cover for CR1496a MTPs  (with closed cell silicone, fixed with pins, 1.5 mm holes)ea1880enzyscreen
          CR1296cSandwich cover for CR1496a MTPs (with black solid silicone, fixed with pins, 0.8 mm holes, low evap.)ea1880enzyscreen
          CR1296dSandwich cover for all types of 96 deepwell MTPs  (with black solid silicone, 1.5 mm holes)ea1880enzyscreen
          CR1296eSandwich cover for CR1496a MTPs (with black solid silicone, fixed with pins, 1.5 mm holes)ea1880enzyscreen
          CR1296tCO2 release Sandwich cover for all types of 96 well MTPs (solid silicone, with 96 PEEK tubes, 0.075 mm I.D. x 5mm )ea3820enzyscreen
          CR1324Universal sandwich cover for 24-well MTPs(with black solid silicone, 19.5 mm hole distance, 2.5 mm holes)ea1880enzyscreen
          CR1324aUniversal sandwich cover for 24-well MTPs, low evaporation(with black solid silicone, 19.5 mm hole distance, 1.2 mm holes)ea1880enzyscreen
          CR1324bUniversal sandwich cover for 24-well MTPs(with black solid silicone, 18 mm hole distance, 2.5 mm holes)ea1880enzyscreen
          CR1324cUniversal sandwich cover for 24-well MTPs, low evaporation (with black solid silicone, 18 mm hole distance, 1.2 mm holes)ea1880enzyscreen
          CR1324dUniversal sandwich cover for 24-well MTPs, low evaporation (with closed cell,  silicone, 18 mm hole distance, 1.2 mm holes)ea1880enzyscreen
          CR1324eUniversal sandwich cover for 24-well MTPs, low evaporation (with closed cell silicone, 19.5 mm hole distance, 1.2 mm holes)ea1880enzyscreen
          CR1384Universal sandwich cover for 384-well MTPs (with black solid silicone, 0.6 mm holes)ea2620enzyscreen
          CR1384tCO2 release sandwich cover for 384 well MTPs  (solid silicone, with 384 PEEK tubes, 0.075 mm I.D. x 5mm )ea7640enzyscreen
          CR1496c16x transparent polystyrene square half deepwell MTP 96 wells of 1.1 ml volume, gamma-irradiated)ea1700enzyscreen
          CR1496cpPolypropylene half-deepwell MTP made from polypropylene(96 wells of 1.1 ml volume, round bottoms,  flattened, detoxified)ea400enzyscreen
          CR1496cpnPolypropylene half-deepwell MTP made from polypropylene (96 wells of 1.1 ml volume, round bottoms,  untreated)ea100enzyscreen
          CR1496dc16x greyish-white COC Topas 8007 square half deepwell MTP,transparent bottom, 96 wells of 1.1 ml volume, gamma-irradiated)ea6400enzyscreen
          CR1496dg16x greyish-white polystyrene square half deepwell MTP,transparent bottom, 96 wells of 1.1 ml volume, gamma-irradiated)ea4760enzyscreen
          CR1496e16x grey polystyrene square half deepwell MTP, transparent polystyrene bottom, 96 wells of 1.1 ml volume, gamma-irradiated)ea3960enzyscreen
          CR1496f16x black polystyrene square half deepwell MTP, transparent polystyrene bottom, 96 wells of 1.1 ml volume, gamma-irradiated)ea3500enzyscreen
          CR1496pEppendorf Polypropylene square deepwell MTP (non-sterile,96 wells of 2.4ml volume, max 8 pieces; larger orders directly via Eppendorfea180enzyscreen
          CR1600Clamp for 6-8 polystyrene lowwell MTPs (fits various shaker platforms)ea10000enzyscreen
          CR1600aClamp for 6-8 polystyrene lowwell MTPs (fits Kuhner shaker platforms only)ea10000enzyscreen
          CR1601Clamp for 6-8  lowwell microtiter plates in gastight box (fits Kuhner shaker platform)ea27200enzyscreen
          CR1602Clamp for 2 PreSens SDR units + MTPs (fits various shaker platforms)ea11000enzyscreen
          CR1602aClamp for 2 PreSens SDR units + MTPs (fits Kuhner shaker platforms only)ea11000enzyscreen
          CR1603Extra tall universal clamp with 2 positions, also suitable for extra high deepwell MTPs (fits various shaker platforms)ea9800enzyscreen
          CR1603aExtra tall universal clamp with 2 positions, also suitable for extra high deepwell MTPs (fits Kuhner platforms only)ea9800enzyscreen
          CR1603hExtra tall universal clamp with 2 positions, also suitable for extra high deepwell MTPs (fits various shaker platforms) with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea10200enzyscreen
          CR1603ahExtra tall universal clamp with 2 positions, also suitable for extra high deepwell MTPs (fits Kuhner platforms only) with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea10200enzyscreen
          CR1700Cover clamp for 4 deepwell MTPs (fits various shaker platforms)ea14400enzyscreen
          CR1700aCover clamp for 4 deepwell MTPs (fits Kuhner shaker platforms only)ea14400enzyscreen
          CR1700bCover clamp for 4 deepwell MTPs(fits Infors shaker platforms only)ea14400enzyscreen
          CR1700cCover clamp for 4 deepwell MTPs (fits Kuhner  EPFL-tray/table only)ea14400enzyscreen
          CR1701Cover clamp for 4 extra high 6-deepwell MTPs (fits various shaker platforms)ea15600enzyscreen
          CR1701aCover clamp for 4 extra high 6-deepwell MTPs (fits Kuhner shaker platforms only)ea15600enzyscreen
          CR1701bCover clamp for 4 extra high 6-deepwell MTPs (fits Infors shaker platforms only)ea15600enzyscreen
          CR1701cCover clamp for 4 extra high 6-deepwell MTPs (fits Kuhner  EPFL-tray/table only)ea15600enzyscreen
          CR1702Cover clamp for 2 deepwell MTPs (fits various shaker platforms)ea7800enzyscreen
          CR1702aCover clamp for 2 deepwell MTPs (fits Kuhner shaker platforms only)ea7800enzyscreen
          CR1703Cover clamp for 3 deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea11400enzyscreen
          CR1705Cover clamp for 5 deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea17800enzyscreen
          CR1800Universal Clamp for 12-16  lowwell MTPs or 4 deepwell MTPs (fits various shaker platforms)ea18200enzyscreen
          CR1800aUniversal Clamp for 12-16  lowwell MTPs or 4 deepwell MTPs (fits Kuhner shaker platforms only)ea18200enzyscreen
          CR1800bUniversal Clamp for 12-16  lowwell MTPs or 4 deepwell MTPs (fits Infors shaker platforms only)ea18200enzyscreen
          CR1800cUniversal Clamp for 12-16  lowwell MTPs or 4 deepwell MTPs (fits Kuhner  EPFL-tray/table only)ea18200enzyscreen
          CR000120x blue microfiber filter inlay for all types of deepwell covers and universal coversea1440enzyscreen
          CR000220x green ePTFE filter inlay for all types of deepwell covers and universal coversea1960enzyscreen
          CR000320x blue microfiber filter inlay for CR1524 and CR1524a covers for Corning MTPs (CR1524)ea1440enzyscreen
          CR000420x green ePTFE filter inlay for CR1524 and CR1524a covers for Corning MTPs (CR1524)ea1960enzyscreen
          CR000520x blue microfiber filter inlay for CR1596ea1440enzyscreen
          CR000620x green ePTFE filter inlay for CR1596ea1960enzyscreen
          CR00075x Replacement closed cell silicone seal, 2.5 mm holes for sandwich cover for 24 deepwell MTP (CR1224, CR1224b, CR1224h)ea2340enzyscreen
          CR0007a5x Replacement closed cell silicone seal, 1.2 mm holes for sandwich cover 24 well MTP (CR1224a, CR1224c, CR1324d, CR1224i)ea2340enzyscreen
          CR00085x Replacement solid  silicone seal, 2.5 mm holes, for universal cover 24-well MTPs, 19.5 mm hole distance (CR1324) ea2860enzyscreen
          CR0008a5x Replacement solid silicone seal, 1.2 mm holes, for universal cover 24-well MTPs, 19.5 mm hole distance (CR1324a) ea2860enzyscreen
          CR0008b5x Replacement solid silicone seal, 2.5 mm holes, for covers for 24-well MTPs, 18 mm hole distance ea2860enzyscreen
          CR0008c5x Replacement solid silicone seal, 1.2 mm holes, for covers for 24-well MTPs, 18 mm hole distance ea2860enzyscreen
          CR0008d5x Replacement closed cell silicone seal, 1.2 mm holes, for universal cover 24-well MTPs, 19.5 mm hole distance (CR1324e) ea2340enzyscreen
          CR00095x Replacement closed cell silicone seal for sandwich cover for 24 lowwell MTP (CR1524) ea2340enzyscreen
          CR0009a5x Replacement solid silicone seal for sandwich cover for 24 lowwell MTP, low evap. (CR1524a)ea2340enzyscreen
          CR0010Stainless steel foil with pinholes for sandwich cover for 24 lowwell MTP (CR1524a)ea740enzyscreen
          CR00115x Replacement closed cell silicone seal for sandwich  cover for 96 well MTP (CR1296, CR1296b, CR1396a, 1.5 mm holes)ea2340enzyscreen
          CR0011a5x Replacement solid silicone seal for sandwich cover for 96 well MTP (CR1296a, CR1296c, CR1396, 1.5 mm holes)ea2860enzyscreen
          CR00125x Replacement solid silicone seal for sandwich cover for 96 well MTP (CR1296a, CR1296c, CR1396, 0.8 mm holes)ea2860enzyscreen
          CR00135x Replacement silicone seal for sandwich cover for 96 low roundwell MTP (CR1596)ea1900enzyscreen
          CR0014Stainless steel foil with pinholes for sandwich cover for 96 low roundwell MTP (CR1596)ea740enzyscreen
          CR00155x Replacement closed cell silicone seal for universal sandwich cover for 6 lowwell MTP (CR1506)ea2340enzyscreen
          CR0017EPDM rectangular sealing for Gastight boxea800enzyscreen
          CR00185x closed cell silicone seal without holes (thickness: 5 mm)ea1060enzyscreen
          CR0018b5x Solid black silicone seal without holes (thickness: 5 mm)ea1060enzyscreen
          CR0020Carbon spacer plate (for stacking deepwell MTPs + covers)ea800enzyscreen
          CR0021Carbon clamp-unit (for universal clamps CR1600, CR1800, etc)ea2580enzyscreen
          CR0021aCarbon clamp-unit for flushing purposes, with an inlet and outlet (includes 2 meter of PTFE spagetti tubing)ea3060enzyscreen
          CR0021bCarbon clamp-unit with stainless steel right angle bracket (for universal clamps CR1600, CR1800, etc, to prevent upper plates to "fly out")ea3060enzyscreen
          CR0022Replacement plexiglass gastight box for CR1601ea10400enzyscreen
          CR0023Replacement valve for CR1601ea480enzyscreen
          CR00245x Replacement solid silicone seal for sandwich cover for 6 well MTP (CR1206, 7 mm holes)ea1900enzyscreen
          CR00255x Replacement solid silicone seal for sandwich cover for 6 well MTP (CR1206a, 4 mm holes)ea1900enzyscreen
          CR0026Cooling block for Growth profilerea9600enzyscreen
          CR1396Universal sandwich cover for 96-well MTPs (with black solid silicone, 0.8 mm holes)ea1880enzyscreen
          CR1396aUniversal sandwich cover for 96-well MTPs (with closed cell silicone, 1.5 mm holes)ea1880enzyscreen
          CR1396bSandwich cover for CR1496a, CR1496c, CR1496d, CR1496dh (with black solid silicone, fixed with pins, 0.8 mm holes, low evap.)ea1880enzyscreen
          CR1396cSandwich cover for CR1496a, CR1496c, CR1496d, CR1496dh (with closed cell silicone, fixed with pins, 1.5 mm holes)ea1880enzyscreen
          CR1396dSandwich cover for CR1496a, CR1496c, CR1496d, CR1496dh (with black solid silicone, fixed with pins, 1.5 mm holes)ea1880enzyscreen
          CR1396ctSandwich cover for CR1496a, CR1496c, CR1496d, CR1496dh (solid silicone, with 96 PEEK tubes, 0.075 mm I.D. x 5mm )ea4160enzyscreen
          CR1524Sandwich cover for polystyrene 24 low roundwell MTPs from Corning, 1.2 mm holes)ea1660enzyscreen
          CR1524aSandwich cover for polystyrene 24 low roundwell MTPs from Corning (low-evaporation version of CR1524)ea1880enzyscreen
          CR1596Sandwich cover for polystyrene 96 low roundwell MTPs (only suitable for MTPs with empty spaces between wells)ea1880enzyscreen
          CR14064x Extra high square deepwell MTP (polystyrene, 85 mm high 6 wells of  82 ml volume, Pyramid bottom, gamma irradiated)ea1440enzyscreen
          CR1406b4x Extra high square deepwell MTP (polystyrene, 85 mm high,6 wells of  82 ml volume, Pyramid bottom, gamma irradiated, with barcode)ea1540enzyscreen
          CR1406b44x Extra high square deepwell MTP (polystyrene, 85 mm high,6 wells 82 ml volume, pyramid bottom, gamma irradiated, barcode, in one bag)ea1540enzyscreen
          CR1424Polypropylene square deepwell MTP (re-usable,24 wells of  11 ml volume, flattened, detoxified)ea420enzyscreen
          CR1424nPolypropylene square deepwell MTP (re-usable,24 wells of  11 ml volume, not flattened, not detoxified)ea120enzyscreen
          CR1424aPolypropylene square deepwell MTP (re-usable, 24 wells 11 ml,flattened, detoxified, with 4 cavities to fit covers with pins)ea460enzyscreen
          CR1424anPolypropylene square deepwell MTP (re-usable, 24 wells 11 ml,not flattened, not detoxified, with 4 cavities to fit covers with pins)ea180enzyscreen
          CR1424cl8 x transparent polystyrene square deepwell MTP (disposable, 24 wells of 11 ml volume, gamma-irradiated, with PS lid, no barcode)ea1280enzyscreen
          CR1424clb8 x transparent polystyrene square deepwell MTP (disposable, 24 wells of 11 ml volume, gamma-irradiated, with PS lid, with barcode)ea1380enzyscreen
          CR1424d8 x grey polystyrene square deepwell MTP (disposable, 24 wells of 11 ml volume, transparant bottom, gamma-irradiated)ea2520enzyscreen
          CR1424dg8 x greyish-White polystyrene square deepwell MTP (disposable, 24 wells of 11 ml volume, transparant bottom, gamma-irradiated)ea2520enzyscreen
          CR1424e8 x white polystyrene square deepwell MTP (disposable, 24 wells of 11 ml volume, transparant bottom, gamma-irradiated)ea2520enzyscreen
          CR1424f16 x  Roundwell MTP Porvair, white walls, transparent bottom (24 wells of 3 ml volume, with lid, gamma irradiated)ea3760enzyscreen
          CR1424hExtra high polypropylene square deepwell MTP (re-usable,24 wells of  25 ml volume, “Hitplate 25", untreated, 88 mm high)ea180enzyscreen
          CR1424hfExtra high polypropylene square deepwell MTP (re-usable,24 wells of  25 ml volume, “Hitplate 25", flattened, 86 mm high)ea320enzyscreen
          CR1424iExtra high polypropylene square deepwell MTP (re-usable,24 wells of  25 ml volume, “Hitplate 25", flattened, detoxified), 86 mm highea560enzyscreen
          CR1496Polypropylene square deepwell MTP (re-usable,(96 wells of 2.4ml volume, flattened, detoxified)ea400enzyscreen
          CR1496nPolypropylene square deepwell MTP (re-usable,(96 wells of 2.4ml volume, untreated: not flattened, not detoxified)ea100enzyscreen
          CR1496aPolypropylene square deepwell MTP (re-usable, 96 wells 2.4 ml,flattened, detoxified, with 4 cavities to fit covers with pins)ea440enzyscreen
          CR1496anPolypropylene square deepwell MTP (re-usable, 96 wells 2.4 ml,not flattened, not detoxified, with 4 cavities to fit covers with pins)ea160enzyscreen
          CR1801Extra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits various shaker platforms)ea18800enzyscreen
          CR1801aExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs ((fits Kuhner shaker platforms only))ea18800enzyscreen
          CR1801bExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits Infors shaker platforms only)ea18800enzyscreen
          CR1801cExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits Kuhner  EPFL-tray/table only)ea18800enzyscreen
          CR1801hExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits various shaker platforms), with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea19600enzyscreen
          CR1801ahExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs ((fits Kuhner shaker platforms only))with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea19600enzyscreen
          CR1801bhExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits Infors shaker platforms only)with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea19600enzyscreen
          CR1801chExtra high universal clamp with 4 positions, also suitable for extra high deepwell MTPs (fits Kuhner  EPFL-tray/table only)with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea19600enzyscreen
          CR1802Clamp for 4 PreSens SDR units + MTPs (fits various shaker platforms)ea20200enzyscreen
          CR1802aClamp for 4 PreSens SDR units + MTPs (fits Kuhner shaker platforms only)ea20200enzyscreen
          CR1802bClamp for 4 PreSens SDR units + MTPs (fits Infors shaker platforms only)ea20200enzyscreen
          CR1802cClamp for 4 PreSens SDR units + MTPs (fits Kuhner  EPFL-tray/table only)ea20200enzyscreen
          CR1803Universal Clamp for 9-12  lowwell MTPs or 3 deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea14600enzyscreen
          CR1803hExtra high universal clamp with 3 positions, also suitable for extra high deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea14900enzyscreen
          CR1803hhExtra high universal clamp with 3 positions, also suitable for extra high deepwell MTPs (fits Eppendorf/New Brunswick platforms only) with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea15700enzyscreen
          CR1805Universal Clamp for 15-20  lowwell MTPs or 5 deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea22000enzyscreen
          CR1805hExtra high universal clamp with 5 positions, also suitable for extra high deepwell MTPs (fits Eppendorf/New Brunswick platforms only)ea23900enzyscreen
          CR1805hhExtra high universal clamp with 5 positions, also suitable for extra high deepwell MTPs (fits Eppendorf/New Brunswick platforms only)with "anti-fly out" brackets, for safer stacking of two deepwell MTPsea24900enzyscreen
           
          
            
          
            
            
            
        
          
    
          


          




          
    
          
        
          
            
          
                
          
                    
          上海起發實驗試劑有限公司
          
                    
          地址：上海浦東川沙鎮川沙路6619號上海起發實驗試劑有限公司
          
                    
          郵箱：xs1@78bio.com
          
                    
          傳真：021-50724961
          
                
          
                
                
          
                    
          關注我們
          
                    
          歡迎您關注我們的微信公眾號了解更多信息：
          
                    
          
                        
          
                        
          歡迎您關注我們的微信公眾號
          了解更多信息
          
                    
          
                
          
            
          
        
          
       
        
          
            
          
                
            
          
        
          
    
          

          



           
     

          












 
  




主站蜘蛛池模板：
亚洲综合色区无码专区|
少妇无码一区二区三区|
精品少妇ay一区二区三区|
2020精品国产福利在线观看香蕉|
色老头久久综合网老妇女|
日韩激情一区二区三区|
亚洲美女国产精品久久久久久久久|
亚洲区第一页|
夜夜澡天天碰人人爱av|
亚洲www啪成人一区二区|
亚洲乱色熟女一区二区蜜臀|
成全高清在线播放电视剧|
久久精品国产亚洲av大全相关|
免费人成网站视频在线观看|
亚洲激情99|
国精产品一品二品国在线|
aa级毛片毛片免费观看久
|
国产熟妇久久777777|
天堂Av无码Av一区二区三区|
日韩欧美色综合|
亚洲午夜福利在线视频|
精品国产一区二区三区香蕉|
亚洲国产超清无码专区|
99er热精品视频|
亚洲AV无码成人精品区不卡|
www亚洲天堂|
国产日韩在线视看第一页|
久久婷婷人人澡人人爱91|
久久精品国产精品亚洲毛片|
日本中文字幕二区三区|
丰满少妇被猛烈进入无码|
色天天综合网色鬼综合|
欧美爱爱网|
日韩 欧美 亚洲 一区二区|
亚洲性日韩精品一区二区三区|
26uuu另类亚洲欧美日本|
在线看片免费人成视频福利|
国产在线精品一区二区|
免费无码AV一区二区波多野结衣|
1精品啪国产在线观看免费牛牛
|
午夜精品区|